Stand A Lone / Remote Digital Controllers

      Remote Digital Controller  Remote Digital Controller
      This is a representative photo of what the remote controller looks like. The color of the box may vary.

      Remote Digital Controllers are completely self-contained units ready to plug in and use. Each is the same as a digital controller mounted on a kiln, except it is in its own separate box.

       

      It works like this:

      1.      You plug the controller power cord into the electrical wall outlet.

      2.      You plug the kiln power cord into the electrical outlet on the side of the controller box.

      3.      You insert the thermocouple (which is attached to the controller box) through the peephole in the side of the kiln. (If you do not have a peephole in the side of your kiln, you’ll need to drill a ˝” hole through the side of your kiln, being careful not to drill through an element in the side of the kiln.)

      4.      A small piece of refractory wool (non-carcinogenic) is provided so you can pack some around the hole through which the thermocouple is inserted - if needed.

      5.      You turn on your kiln and set the controls on your kiln to High. (At this point, there is NO power going to your kiln.)

      6.      You now turn on the remote controller and program the controller. When you tell the controller to start, it will supply power to your kiln and the firing will begin.

       

      The remote controllers come standard with the 8-gauge thermocouple.





      120 volt, 15 amp Digital Controller

      NEMA: 5-15R NEMA: 5-15R — Regular Household Electric
      Bartlett 3 Button Go to ordering page. CDV Price: 350.00  
      Bartlett 12 Button Go to ordering page. CDV Price: 499.00  
      Orton 3 Button Go to ordering page. CDV Price: 350.00  
      Orton 12 Button Go to ordering page. CDV Price: 499.00  
      Shipping: $14.00


      120 volt, 20 amp Digital Controller

      NEMA: 5-20R NEMA: 5-20R
      Bartlett 3 Button Go to ordering page. CDV Price: 350.00  
      Bartlett 12 Button Go to ordering page. CDV Price: 499.00  
      Orton 3 Button Go to ordering page. CDV Price: 350.00  
      Orton 12 Button Go to ordering page. CDV Price: 499.00  
      Shipping: $14.00


      240 volt, 20 amp Digital Controller

      NEMA: 6-20R NEMA: 6-20R
      Bartlett 3 Button Go to ordering page. CDV Price: 350.00  
      Bartlett 12 Button Go to ordering page. CDV Price: 499.00  
      Orton 3 Button Go to ordering page. CDV Price: 350.00  
      Orton 12 Button Go to ordering page. CDV Price: 499.00  
      Shipping: $14.00


      240 volt, 30 amp Digital Controller

      NEMA: 6-30R NEMA: 6-30R
      NEMA: 10-30R NEMA: 10-30R Old Style
      Bartlett 3 Button Go to ordering page. CDV Price: 375.00  
      Bartlett 12 Button Go to ordering page. CDV Price: 575.00  
      Orton 3 Button Go to ordering page. CDV Price: 375.00  
      Orton 12 Button Go to ordering page. CDV Price: 575.00  
      Shipping: $16.00


      240 volt, 50 amp Digital Controller

      NEMA: 6-50R NEMA: 6-50R
      NEMA: 10-50R NEMA: 10-50R Old Style
      Bartlett 3 Button Go to ordering page. CDV Price: 475.00  
      Bartlett 12 Button Go to ordering page. CDV Price: 649.00  
      Orton 3 Button Go to ordering page. CDV Price: 475.00  
      Orton 12 Button Go to ordering page. CDV Price: 649.00  
      Shipping: $16.00



    lampworking torches, beadmaking kilns, glass kilns, ceramic kilns: Center DeVerre
    *Where shipping cost is mentioned,
    continental US only.
    Prices effective - subject to change without notice.
    Where UPS shipping is included, continental US only.

    Centre DeVerre




    Centre DeVerre
    3 Robinson Road, Unit A2    Directions
    Bow, NH 03304

    Monday-Friday, 9 a.m. - 5 p.m. Eastern
    2nd Saturday of month, 10 a.m. - 1 p.m. Eastern.

    Toll free: ( 800 ) 958-5319
    Phone: ( 603 ) 228-2900
    Fax: ( 603 ) 228-2905
    Email: cdvcom@verizon.net